• JEDEC JESD302-1 DDR5 Grade B Support
• Exceeds JEDEC Temperature Accuracy Standards:

  -- ±0.3°C Typical from –40°C to +125°C

  -- ±0.5°C Max from +75°C to +95°C

  -- ±0.8°C Max from –40°C to +125°C

• Low Quiescent and Stand by Currents:

  -- 5.7μA Average Quiescent Current (typ.)

  -- 3.8μA Standby Current (typ.)

• Power Supplies:

  -- 1V I/O Power Supply

  -- 1.8V Core Power Supply

• Two-Wire Serial Bus Interfaces (I2C and I3C Basic Operation Modes)
• Data Transfer Rate: Up to 12.5MHz in I3C  Basic Mode
• In-Band Interrupt (IBI) for Alerting Host
• Error Detection Functions:

  -- Parity Check for Host Writes

  -- Packet Check for Host Reads and Writes

• 11-bit Resolution with 0.25°C per LSB 
• Standard 6-Ball DSBGA (WCSP) Package With 0.5mm Pitch

The SQ52912 is a high-accuracy temperature sensor featuring a I2C/I3C-compliant digital interface.  Designed in line with the JEDEC JESD302-1 standard for Grade B devices, the SQ52912 surpasses the temperature accuracy requirements, making it a key component for optimizing DDR5 memory module performance. The SQ52912 is designed for low-power, high-accuracy thermal monitoring applications and is available in a compact 6-ball DSBGA package.

The SQ52912 operates with a core power supply of 1.8V and an I/O power supply of 1V. It features a low typical average quiescent current of 5.8μA during each 125ms conversion. 

The SQ52912 offers a typical accuracy of ±0.3°C across the full temperature range of –40 °C to +125 °C. It integrates an on-chip 11-bit analog-to-digital converter (ADC) designed to operate with a 1.8V core power supply and a 1.0V I/O power supply. The SQ52912 also supports advanced features such as in-band interrupts, parity checks, and packet error checks.