5.5V, Low RDS(ON) Dual-Channel 6A Load Switch
![]()
- Parameters
- Features
- Description
| Part Number | SY20826DUC |
|---|
| Vin_min (V) | 0.8 |
|---|
| Vin_max (V) | 5.5 |
|---|
| Io_max (A) | 6 |
|---|
| Channels | 2 |
|---|
| Enable | Active High |
|---|
| Rdson1 | 18 |
|---|
| Protection Mode | |
|---|
| Features / Special Function | Dual-channel, Programmable soft-start time |
|---|
| Package | DFN3x2-14 |
|---|
- Dual-channel 6A Load Switch
- Wide Input Voltage Range from 0.8V to 5.5V
- Low Bias Current:
20µA Typical(Both Channels)
18µA Typical(Single Channel)
- Extremely Low RDS(ON) for the Integrated Switch: 18mΩ (VBIAS=5V)
- Programmable Soft-start Time
- Compact Package: DFN3×2-14
The SY20826 is a dual-channel 6A load switch. Its integrated N-channel MOSFETs feature extremely low RDS(ON), helping to reduce power loss during normal operation. The capacitor programmable soft-start time controls the output voltage's slew rate at start-up independently on each channel, minimizing the inrush current. This device also offers independent enable controls for complex system sequencing. It integrates a discharge resistor to ensure quick output discharge when the switches are turned off.
The SY20826 is available in a compact DFN 3mm×2mm-14pin package which requires minimal space and provides improved thermal performance.
Evaluation Board
Photo of evaluation board
Photo of evaluation board
Photo of evaluation board
The EVB_SY20826DUC is intended for evaluating a dual-channel 6A load switch. Extremely low RDS(ON) of the integrated two N-channel FETs help to reduce power loss during the normal operation.
